What is the process for medical harnesses?

What is the processing flow of medical wiring harness? Where is the important control point of each process? The following answers to these two questions one by one: 1. Incoming inspection: to inspect the incoming materials, there are three inspection methods according to the quality status of the supplier: full inspection, sampling inspection and exemption from inspection; Warehousing of 2、 materials: After the inspection by the quality personnel is completed, the warehouse personnel shall put the materials into a fixed bin according to the inspection label of the quality personnel (red represents the treatment of defective return, and the qualified label has the company's material number, product name, etc.); Material preparation for 3、: The material clerk of the production line will deliver the materials of the order to be produced to the production line one day in advance according to the schedule, and confirm the model and quantity of these materials; 4、 wire cutting: IPQC and the team leader must confirm the wire model, supplier, length of wire cutting and stripping, total order quantity, etc., otherwise, once the machine is adjusted incorrectly, a large number of material losses will be caused when the machine is started; 5. Stripping: The medical harness has been stripped when cutting the wire or directly cut the wire, stripped and made terminals. Pay special attention to safety when using the pneumatic peeling machine; 6. Pressing: IPQC needs to confirm the first piece and conduct regular inspection, because this is the key process in the harness processing flow. End inspection of 7、: it is divided into two parts: self-inspection of the operator and full inspection of the end inspection personnel (the magnifier inspects all the end lines); 8. Assembly, the key point is to do a good job of the fool-proof fixture to prevent missing and dislocation; 9. Assembly, threading the heat-shrinkable sleeve, stranded wire, magnetic ring, etc.; For the 10、 conduction test, the IPQC and the tester shall perform the self-inspection of the equipment and the inspection of the fixture before the test, and then the tester shall perform the test with the medical wiring harness tester; 11. Appearance inspection, the key point of the medical wiring harness is to check the wire sequence, and the appearance inspection shall be performed according to the molding inspection standard; 12、 OQC needs to conduct a comprehensive sampling inspection of finished products, including appearance, size, function, aging test, etc.; 13. Warehousing; 14. Delivery inspection, which is an inspection on behalf of the customer, focusing on whether the label is consistent with the real object in the box, such as whether there is any abnormality in the wire placed for a long time (such as whether the wire or rubber ring is moldy or the terminal is oxidized, or whether there is any change that has not been disposed of);

---------------------------------------------------------------------------------------------------

2、 on the World Trade Electronic Products Network Platform and Sales Product Profile: World Trade Electronic Products Network-professional agent/production/sales of various { connector | harness | cable products }; If you have relevant [connector | harness | cable products] procurement/purchase needs or want to buy/know what connector | harness | cable products solutions we can provide, please contact our business personnel below; if you have relevant [connector | harness | cable products] sales/resources and promotion needs, please click "Business Cooperation ←" to negotiate with the specialist!