Reasons to use board-to-board connectors here

Imagine what it would be like without an adapter? At this time, the circuits should be permanently connected together with continuous conductors. For example, if the electronic equipment is to be connected to the power supply, it is necessary to fix the two ends of the connecting wire with the electronic equipment and the power supply by some means (such as welding). In this way, whether for production or application, it has brought many inconveniences. Then the board-to-board connector manufacturers will gather yuan to popularize the reasons for using board-to-board connectors for you! Take led landscape lights as an example. The distance from the power supply to the lamp holder is generally relatively large, if each line from the power supply to the lamp holder is connected from beginning to end, it will bring unnecessary trouble to the construction, and will form a waste of wire. Some people will question, open a gap directly from the live wire, connect the conductive part of the wire together, and then wrap a few layers of insulation glue, can't it? It is indecisive to use the adapter. First of all, most of the insulating tapes are simply aged, and there are potential safety hazards; secondly, the mechanical properties of the joints directly put together with wires are very poor, and the slight vibration and stretching of the lines are very simple to form an open circuit, and the poor contact of the interfaces is simple to form a heating, thus causing a fire; moreover, the outdoor environment is harsh, and the requirements for water, salt and aging prevention are relatively high, and the insulating glue is far from meeting the requirements. However, if high-performance waterproof connectors are used in outdoor lighting, not only the installation of the power grid is simplified, but also the potential safety hazards will be reduced to a very low level. This, for example, briefly illustrates the advantages of the adapter. It makes the planning and production process more convenient, more sensitive and safer, and also reduces the cost of production and protection. Appearance of the adapter improves the production process. The adapter simplifies the assembly process of the electronic product, simplifies the batch production process, and is easy to maintain. If an electronic component fails, the failed component can be quickly replaced when the adapter is installed, and the board-to-board connector is easy to upgrade. With the progress of technology, when the adapter is installed, the single-slot board-to-board connector can update the component and replace the old component with a new and more perfect one. The sensitivity of the application of the adapter enables engineers to plan and integrate new products. As well as greater sensitivity when the system is composed of components. Especially for industrial adapters, sensitivity and safety are more important when they are used in harsh environments where plugging and unplugging are required. At this time, a simple plug and play adapter with a snap fastener would be the right choice.

---------------------------------------------------------------------------------------------------

2、 on the World Trade Electronic Products Network Platform and Sales Product Profile: World Trade Electronic Products Network-professional agent/production/sales of various { connector | harness | cable products }; If you have relevant [connector | harness | cable products] procurement/purchase needs or want to buy/know what connector | harness | cable products solutions we can provide, please contact our business personnel below; if you have relevant [connector | harness | cable products] sales/resources and promotion needs, please click "Business Cooperation ←" to negotiate with the specialist!