Binder|Binder Introduces UL Listed 7/8 Connectors - Reliable Power Delivery for Automation Equipment

Binder From sensor bus application technology to lighting equipment: Thanks to the stable connection design, UL-certified Binder 7/8 ''connectors enable more stable power transfer to components and devices in automation technology. All suppliers adopt the same plug-in design, which makes its application more flexible and improves the security of procurement. As a leading supplier of industrial circular connectors, Binder introduces 7/8 "connectivity solutions. The number of cores is 3, 4 and 5, and the wiring is screwed, while the version with pre-cast cable is available at right angle or bent angle. The product adopts thread locking and meets the protection requirements of IP67. The protection level of the injection-molded cable connector even reaches IP68, and it has also prepared UL certification for the North American market. According to UL regulations, the current of 3 cores is 13A and the rated voltage is 300V or 600V. The 7/8 ''connector is suitable for the transmission supply of equipment power supply in automation technology.

------------------------------------------------------------------------1. Build a good interface for power supply between equipment: Highly flexible 7/8 "connection technology will play an important role in production, factories and automated warehousing applications, such as packaging and food industries. In the above applications, power transmission between sensors, actuators and various bus devices is the cornerstone of everything. Practical applications include drives, lighting and heating equipment. It is very common to use distribution boxes for power transmission and supply, using 7/8 "connectors, as well as sensor and actuator control cabinets. These devices are used to simplify on-site circuit connections and cables. They are also the most critical components of stable and divergent automation solutions, so they also need stronger connection technology to support them. Binder's 7/8 "is IP67/68 protected against particles and moisture when connected, making it a durable industrial-grade power supply component. 2. 7/8 ": Origin and characteristics: Sensors and actuators are used throughout industrial environments to control process parameters such as temperature, pressure, position or vibration. With the advancement of digital production lines and smart factories, as well as the development of environmental monitoring and predictive maintenance applications, the number of sensors and actuators used in the field is increasing day by day. Industrial-grade stable connection solutions for signal interfaces, data and power cables used in field devices are also increasing simultaneously. Considering that the focus of all installations is efficient, simple and fast connection technology is extremely important. Connectors that are pre-assembled and already injection molded and tested have significant advantages. Such connectors eliminate the time-consuming and error-prone process of separate wiring, thus greatly reducing installation and wiring effort and contributing to an efficient plug-and-play concept. 3. Field wiring and plug-and-play: For power supply applications in the automation industry, Binder offers plug-and-play, pre-assembled and injection-molded cable connectors: straight heads and corners, different cable lengths, and stainless steel thread locking designed for corrosive environments. Field wiring version with more flexibility in choice of cable material and length. Screw wiring for easy assembly and disassembly; Can be connected to cables with a diameter of 6-12mm; The wire gauge is larger than 2.5 mm2. Gold-plated pins and stainless steel components give it a long mechanical life at low contact resistance, especially in industrial use environments. 4. Special versions available: When panel installation is required, users can choose 7/8 "flange seats with multiple thread designs. In terms of wiring methods, there are various lengths of products with wires and dip soldering connections used in PCB boards. Binder has also introduced products for the CAN-based DeviceNet fieldbus. For example, the 870 series T-shaped distributor with different core counts can divide one power supply into two, and the transmission can supply two loads. 5. Application fields and product features of Binder 7/8 "connector: