What is the terminology for RF connector aerial plugs?

There are many technical terms for radio frequency connector aerial plug, and the national industry standard GB4210-84 (equivalent to IEC50) describes the relevant technical terms. This section only lists key technical terms, other technical terms can be checked.

------------------------------------------------------------------------------------------------

(1) Radio frequency Connector (Connector): generally refers to the electronic components that can connect the cable to the cable wiring end or obtain it quickly; (2) Touch industrial park spacing: the main parts where the touch parts are installed; (3) contacts: a conductivity preform member connecting the electronic component to give the cable to the cable, to the additional coupling of the cable to the prefabricated component or assembly; (4) Socketcontact: a negative contact, which can be plugged into a positive contact, and is generally connected to the energized side of the power circuit; (5) The pin plug is generally matched with the socket, and is generally connected to the unplugged side of the power circuit; (6) Plug power cord (Plug): The two pieces of the RF connector inserted can be moved at will without the RF connector to the other half. Generally, the RF connector is considered positive. (7) The power cord plug is the firm or unmoved half of the two-piece multi-touch RF connector, and also refers to the half RF connector generally installed on the controller with a socket; (8) Touch resistor: the highest allowable resistor for pins and sockets installed on RF connectors in common applications; (9) Wire connector resistor: Under the standard prerequisite, all resistors that accurately measure the raw materials of the insulating layer in the middle of a pair of contact surfaces, in the middle of electrical conductors or in the middle of ground wire electronic components with different compositions; (10) Contact surface placement (11) interchangeability (12) wire connection (13) crimping (14) winding: connecting the solid core transmission line to the square, square or V-shaped terminal terminal by closely surrounding it with a special automaton or handicraft; (15) Grid diagram: Orthogonality and big data technology with fixed distance between vertical planes are used to accurately position points on packaging printing plates.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If you have related [connector wiring harness and cable production] purchasing/purchasing needs or want to purchase/understand which connector wiring harness and cable product solutions we can provide, please contact our business staff below; If you have related sales/resources and promotion needs of [Connector Wiring Harness and Cable Production], please click "→ Business Cooperation ←" to negotiate with a dedicated person!