The Importance of Automotive Wiring Harnesses for Automobiles The four main possibilities of a non-electrified electronic wiring harness?

Automobile wiring harness is an important component that connects various electrical appliances and electronic equipment in automobiles. It plays the role of transmitting electrical signals between electronic equipment and electrical appliances, and is the carrier of electrical signal control for automobiles. It can be said that without wiring harness, there would be no automobile circuit. With the increasing requirements of modern society for automobiles, the intelligence of automobiles is also improved, which puts forward higher requirements for automobile wire harnesses. Matching the automobile wire harness is an automobile connector. The function of the connector is a device that realizes quick connection and blocking between wire harnesses and between wire harnesses and other electronic equipment. The development of automotive electronic technology and the development of wire harnesses also put forward higher requirements for connectors. Connectors should be more flexible and have higher insulation, which can provide better conditions for the conduction of wire harnesses, improve automobile performance and increase the reliability and safety of automobiles. As an important part of automobile wire harness, the design and research of automobile connector has also become an important part of how to improve automobile performance and intelligence. The ideal result of the design of wire harness is that short wires and appropriate wire cross-sections can be used to ensure that all automotive electrical and electronic equipment can work normally. Therefore, there are strict requirements on wire material, quality, conductivity and other aspects. In addition to the material of the wire itself, the working ability of automobile wiring harness also involves externally controllable factors such as the cross section of the wire. Therefore, when selecting the wire harness, not only the wire itself should be considered, but also the specific operation and practice of researchers should be required. There are also extremely high requirements for connectors that play the role of connection and connection. The friction and wear of the contact ends of connectors should be able to withstand the test of long-term work of automobiles. Materials that are easy to wear or have insufficient friction should be eliminated as soon as possible. The connector is composed of two parts: base and contact end, so the research of connector is destined to be more complicated than the wire harness.

------------------------------------------------------------------------------------------------------

Electronic wiring harness is a common conductor, which is often used in all kinds of electrical products. In the process of using electronic wiring harness, we often encounter some situations, that is, the electronic wiring harness is not powered on, which leads to the failure of electrical products, etc. Here's an analysis of various reasons why the electronic wiring harness is not powered on like Xiaobian for you! 1. It may be the aging of the insulator: the aging and cracking of the insulator leads to the failure of the wiring harness to be energized normally, because during long-term use, the insulator will have poor heat dissipation or overload, thus being destroyed. Then for safety reasons, it is necessary to change the wiring harness in time. 2. Moisture of the insulator: It may be caused by improper use or improper construction, resulting in moisture of the insulation layer, which further leads to the abnormal power-on of the wiring harness. Because in some humid environments, the resonance and cracks generated by the wiring harness during use will make it easier for water molecules to enter, which will lead to the moisture of the electronic wiring harness. In view of this situation, we should strengthen the insulation layer of the protective wiring harness in time, and consider replacing the wiring harness in severe cases. 3. Damage: In the process of using the wiring harness, due to improper operation, the wiring harness is damaged, causing the wiring harness to bend too much or other symptoms, resulting in it not being powered on normally. Then at this time, you must first check what the condition is, and then repair it. If it cannot be repaired, consider replacing the wiring harness. 4. Excessive voltage: that is, excessive voltage leads to the breakdown of the electrical layer, resulting in the fault that the wiring harness cannot be powered on.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If you have related [connector wiring harness and cable products] purchasing/purchasing needs or want to purchase/understand which connector wiring harness and cable product solutions we can provide, please contact our business staff below; If you have related [Connector Wiring Harness Cable Products] sales/resources and promotion needs, please click "→ Business Cooperation ←" to negotiate with a dedicated person!