Processing Flow of Robot Wiring Harness?

Robot wiring harness is used in robot systems and mobile equipment, production lines, robot arms and other occasions. In order to make cables last longer in dry or humid indoor environments, the wiring harness generally uses special PUR as the sheath material, which has good oil resistance, bending resistance, wear resistance, microbial resistance, hydrolysis resistance, chemical corrosion resistance, ultraviolet resistance and other properties, which can protect the wiring harness from external force damage; Tin-plated copper is used to wrap the shielding layer regularly, so that the wire harness has strong ability to resist external electromagnetic interference and ensure the stability of the wire harness system!

-------------------------------------------------------------------------------------------------

Processing flow of robot wiring harness 1. Acceptance of incoming materials: Use ROHS instruments to conduct environmental protection tests to test whether all incoming materials required for robot wiring harnesses comply with ROHS specifications. Required equipment: OHS tester equipment, process requirements: Incoming materials are forbidden to contain harmful substances such as lead (Pb), mercury (Hg), cadmium (Cd), bromobiphenyl (PBB), polybrominated diphenyl ether (PBDE), etc. 2. Wire feeding equipment: Put the required processed wire on the transfer wire frame. Equipment required: Wire feeding rack. Process requirements: Be careful not to scratch or scratch the exterior of the wire. 3. Wire feeding: Put the wire into the wire feeder and fix it. Required equipment: wire feeder. Process requirements: Be careful not to scratch and scratch the surface of the wire. 4. Wire cutting: The robot wiring harness uses a wire cutting machine to cut the wire to the required length. Required equipment: Computerized wire cutting machine. Process requirements: Do not cut the surface of the wire; It is forbidden to cut copper wires; The error of peeling length is forbidden to exceed ± 1 mm. 5. Wire peeling: Peel off the insulating outer cover of the corresponding length of the wire at the joint according to the requirements of sop. Required equipment: Pneumatic peeling machine. Process requirements: Do not crush the appearance; The error of peeling length is forbidden to exceed ± 1 mm. 6. Twist: arrange and twist the conductors at the joints. Equipment Required: Thread Twister. Process requirements: It is forbidden to scratch and scratch the surface of the wire; It is necessary to twist the copper wire tightly to prevent loose wire. 7. Rivet terminals: Rivet the conductors and plug terminals at the joints. Required equipment: terminal machine. Process requirements: Terminal deformation is prohibited; It is necessary to meet the requirements of tensile force, riveting height and width. 8. Product installation: Assemble the plastic plug shell. Required equipment: electric screw batch. Process requirements: Screws are forbidden to expose the surface of the rubber shell; It is necessary to achieve the torque required by the product. 9. Conductivity test: Use the instrument to conduct the conduction test of the wiring harness. Required equipment: conduction tester. Process requirements: Short circuit, open circuit, miswiring, poor contact, poor insulation and other phenomena are forbidden. 10. Packaging and sealing: Use plastic bags to package wiring harness products and put them into cartons. Required equipment: sealing machine and baler. Process requirements: The sealing should be flat; The packing belt should be tightly wrapped in the carton, and it is forbidden to drop it. The above is the processing process of the robot wiring harness, please refer to it.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If you have related [connector wiring harness and cable production] purchasing/purchasing needs or want to purchase/understand which connector wiring harness and cable product solutions we can provide, please contact our business staff below; If you have related sales/resources and promotion needs of [Connector Wiring Harness and Cable Production], please click "→ Business Cooperation ←" to negotiate with a dedicated person!