What is the process of industrial equipment wiring harness, and what is the function of industrial equipment wiring harness components?

The processing process determines the quality of industrial equipment wiring harnesses, so the processing of wiring harnesses should be very detailed, and strict management should be used to ensure excellent quality and avoid batch problems of wiring harnesses. Then next, I will show you a complete wiring harness processing process.

What is the processing technology of industrial equipment wiring harness? 1. Wire feeding equipment: Put the required processing line on the transfer wire feeding rack. Required equipment: wire feeding rack. Process requirements: Be careful not to scratch the surface of the wire. 2. Wire feeding: Fix the wire on the wire feeder. Required equipment: wire feeder. Process requirements: Be careful not to scratch the surface of the wire. 3. Tangent: Use a thread cutting machine to cut the thread. Required length: computer thread cutting machine, process requirements: thread surface; Do not cut the copper wire; The deviation of peeling length shall not exceed ± 1 mm. 4. Wire peeling: Equipment required according to SOP: pneumatic peeling machine, process requirements: do not press the surface; The deviation of peeling length shall not exceed ± 1 mm. 5. Twist: Sort and twist the conductors at the joints. Required Equipment: Wire Twister Process Requirements: The surface of the wire must not be surface; The copper wire must be tightened and there must be no loose wires. 6. Riveting terminals: Riveting joint conductors and plug terminals. Equipment Required: Terminal Machine. Process requirements: Terminals must not be deformed; Requirements for tension, riveting height and width must be met. 7. Product assembly: Assemble the plastic plug shell, required equipment: electric screw batch, process requirements: screws are not allowed to expose the surface of the plastic shell; The torque required by the product must be achieved. 8. Wire test: Use the instrument to test the wire harness wire. Equipment Required: Wire tester. Process requirements: short circuit, open circuit, miswiring, poor contact, poor insulation. 9. Packaging Packaging: Pack the finished wiring harness in plastic bags and pack it into cartons. Equipment Required: Sealing Machine and Packaging Machine. Process requirements: The seal should be smooth; The packing tape should be tightly wrapped around the carton and should not fall off.

-------------------------------------------------------------------------------------------------

What are the functions of industrial equipment wiring harness components? 1. Wire: transmits power and signals from one end to the other. 2. Sheath: Ensure reliable connection. 3. Terminal: The general term for plug-ins and connectors. Connect different wires to transmit signals. 4. Waterproof bolt: Isolated from the external environment and plays a sealing and protective role. Sleeve: Used to protect the wiring harness. 6. Fuse: Short circuit or overload protection of automotive electrical equipment. 7. Clip tie: used to fix the wiring harness in the car. 8. Rubber parts: Rubber parts are generally used in automotive wiring harness vias to play a wear-resistant, waterproof, and sealing role. 9. Tape: Wrapped around the surface of the wire harness to protect the wire harness. The above is a detailed introduction to "What is the processing technology of industrial equipment wiring harness and what are the functions of industrial equipment wiring harness components?" I hope it can help everyone.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If you have related [connector wiring harness and cable production] purchasing/purchasing needs or want to purchase/understand which connector wiring harness and cable product solutions we can provide, please contact our business staff below; If you have related sales/resources and promotion needs of [Connector Wiring Harness and Cable Production], please click "→ Business Cooperation ←" to negotiate with a dedicated person!