Connector daily use and maintenance lightning guide

Minefield One: Using the wrong connector or faulty connector. The 2.4 mm connector cannot be mixed with 2.92 mm, 3.5 mm and SMA connectors. Incorrect use can lead to permanent mechanical damage. Faulty connectors need to be discarded in time, otherwise it will affect other connected devices. For example, a male connector with an offset pin can damage the inner conductor of the female connector connected to it. Minefield 2: Screwing the connector with your bare hands When screwing the connector with your bare hands, it will bring bad test results. Minefield 3: Use the wrong torque wrench to screw the joint. The third largest minefield is using the wrong torque wrench to screw the joint. The reason why a torque wrench is used is to ensure that the force applied to each connection is the same, that is, the tightness is the same every time, so that repeatable measurement results can be obtained and the connector will not be damaged due to excessive force. Therefore, different connectors require different torque wrenches due to their differences in size, material, and performance.

-------------------------------------------------------------------------------------------------

Minefield 4: Improper use of torque wrench to screw the connector. Sometimes the torque wrench is selected correctly, but the connector is still broken when looking for a sample supplier on site. Why is this? Quite simply, your approach is wrong. Yes, the method is very important, such as the position and angle of the torque wrench, etc. When connecting, you need to strictly follow the operation steps. Minefield 5: Putting connectors together for storage management. In some users'sites, we found that all the connectors came in a box. This has the advantage of easy access. But the problem is that every time you find a connector, you need to rummage through boxes and cabinets. The connectors will collide, which will easily cause mechanical wear. Dimensional changes will affect impedance and lead to performance degradation; It may even eventually lead to damage to the connector. Therefore, we recommend storing the connectors separately. If you must put it together, you can find a piece of anti-static material, dig some grooves according to the size of the joint, and separate the joint into it. This is clear at a glance, easy to access, and also protects the connector from damage.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If you have related [connector wiring harness and cable production] purchasing/purchasing needs or want to purchase/understand which connector wiring harness and cable product solutions we can provide, please contact our business staff below; If you have related sales/resources and promotion needs of [Connector Wiring Harness and Cable Production], please click "→ Business Cooperation ←" to negotiate with a dedicated person!