Categorization：Brand Connector
HRS | Hirose | FH62 series 0.25 mm pitch/1.1mm height/self-locking FPC connector is an FPC connector with 0.25 mm pitch, 1.1mm height, top contact single action lock and high FPC retention force. Its main features are: 1. Space-saving design ・ Space-saving design, pitch 0.25 mm. Width 4.0mm. 2. Automatic single-acting lock design • Easy-to-use single-acting lock design, insert FPC after installation. (When removing the FPC, release the lock by operating or opening the lock lever.) ・ There is no need to operate the locking lever when cooperating with FPC. Operable with one hand. ・ There is no need to operate the locking lever when cooperating with FPC. This helps reduce assembly time. ・ It is not necessary to operate the locking lever when assembling the FPC. Operation will not damage the locking lever. ・ It is not necessary to operate the locking lever when assembling the FPC. The absence of a lever during insertion eliminates faults caused by FPC movement during locking. 3. High FPC retention ・ The notches on both sides of the FPC are fixed by the locking lever, which can produce high FPC retention despite the smaller size. 4. Easy to insert FPC. Wide guide rail is convenient for FPC insertion. 5. Support 0.3mm thick FPC ・ This design can accommodate rigid 0.3mm thick FPC, which helps to prevent FPC deformation during insertion. 6. Support high-speed transmission ・ Support high-speed transmission with excellent impedance characteristics. By using the same type of contacts (even-even contacts, odd-odd contacts) to make differential pairs, excellent transmission characteristics can be obtained, supporting eDP (ver1.4), MIPI (D-PHY), and USB3.0 standards.
1、 HRS | Hirose | Japan Hirose FH62 Series 0.25 mm Pitch/1.1mm Height/Self-locking FPC Connector Main Product Specification Details:
| Connector type | Number of PINs |
| Socket | 13, 17, 21, 31, 35, 39, 41, 55, 61 |
| Installation spacing | Number of other PINs |
| 0.5 mm | Opening spacing |
| Connector length (spacing direction) | 0.25 mm |
| 6.46, 7.46, 8.46, 10.96, 11.96, 12.96, 13.46, 16.96, 18.46 mm | Number of Columns (Installation Section) |
| Connector height | 2 |
| 1.1 mm | Transmission specification |
| Connector width (longitudinal) | Transmission speed |
| 4.0 mm | (Max.) Operating Temperature Range |
| Contact point position | 85 ℃ |
| Upper contact | (Min.) Operating Temperature Range |
| ZIF/Non-O ZIF/LIF | -55 ℃ |
| Recommended FFC/FPC | (AC) Rated voltage |
| FPC | AC 30.0 V |
| FPC/FFC insertion direction | (DC) Rated voltage |
| Level | DC 30.0 V |
| Movable plate direction | Rated current |
| 0.3 A |
------------------------------------------------------------------------------------------------
2、 Japan HRS | Hirose | FH62 series 0.25 mm pitch/1.1mm height/self-locking FPC connector Main material number/model:
| FH62-13S-0.25SHW(99) | FH62-39S-0.25SHW(99) | FH62-21S-0.25SHW(10) | FH62-41S-0.25SHW(10) | FH62-17S-0.25SHW(10) |
| FH62-17S-0.25SHW(99) | FH62-41S-0.25SHW(99) | FH62-13S-0.25SHW(10) | FH62-61S-0.25SHW(10) | FH62-35S-0.25SHW(99) |
| FH62-21S-0.25SHW(99) | FH62-55S-0.25SHW(99) | FH62-39S-0.25SHW(10) | FH62-31S-0.25SHW(10) | FH62-35S-0.25SHW(10) |
| FH62-31S-0.25SHW(99) | FH62-61S-0.25SHW(99) | FH62-55S-0.25SHW(10) |
------------------------------------------------------------------------------------------------
3、 Japan HRS Connectors -- HRS | Hirose | FH62 Series 0.25mm Pitch/1.1mm Height/Self-Locking FPC Connectors
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
