Categorization：Brand Connector
HRS | Hirose | Hirose TF13BA Series 0.4mm Pitch/0.9 mm Height/Lower Contact FPC Connector is a: 0.4mm Pitch, 0.9 mm Height, Bottom Contact, Rear Flip/Front Shaft ™, FPC/FFC connector; Its key features are: 1.Rear Flip/Front Axle ™ ensures constant contact clearance regardless of actuator operation. The actuator can be turned off before the FPC/FFC is inserted. Furthermore, since the actuator can be delivered and installed in the closed state, the risk of damage to the actuator is reduced. 2.Prevent the actuator from falling off. Each terminal is attached to the actuator, providing support for the entire length of the actuator. This prevents the actuator from separating from the housing. 3.FPC/FFC Side Trap Design The TF13B (S) A series uses Hirose's FPC/FFC-Side Trap technology. This design feature allows the tagged FPC/FFC to be placed in the correct position while achieving stability and excellent FPC/FFC retention. 4.Easy insertion of FPC/FFC The FPC/FFC can be inserted smoothly with a taper on all four sides of the FPC/FFC insertion part. 5. That bottom surface of the connector for enlarge the space of the circuit board is subjected to secondary mol. This allows the PCB space under the connector to be used for additional PCB routing. 6.Pick-and-place mounting is available in tape and reel packaging and is compatible with automatic machine mounting. 7. Halogen-free-All materials and substances used in the manufacture of this product are halogen-free * Br: greater than 900 ppm, Cl: greater than 900 ppm, Br + Cl: greater than 1500 ppm as defined in IEC 61249 2-21.
1、 HRS | Hirose | Japan Hirose TF13BA Series 0.4mm Pitch/0.9mm Height/Lower Contact FPC Connector Main Product Specification Details:
| Connector type | Number of PINs |
| Socket | 6, 9, 10, 14, 16, 18, 20 |
| Installation spacing | Number of other PINs |
| 0.4 mm | Opening spacing |
| Connector length (spacing direction) | 0.4 mm |
| 4.2, 5.4, 5.8, 7.0, 7.8, 8.6, 9.4 mm | Number of Columns (Installation Section) |
| Connector height | 1 |
| 0.9 mm | Transmission specification |
| Connector width (longitudinal) | Transmission speed |
| 3.0 mm | (Max.) Operating Temperature Range |
| Contact point position | 85 ℃ |
| Lower contact | (Min.) Operating Temperature Range |
| ZIF/Non-O ZIF/LIF | -55 ℃ |
| ZIF | (AC) Rated voltage |
| Recommended FFC/FPC | AC 50.0 V |
| FPC/FFC connector | (DC) Rated voltage |
| FPC/FFC insertion direction | DC 50.0 V |
| Level | Rated current |
| Movable plate direction | 0.5 A |
| Back |
------------------------------------------------------------------------------------------------
2、 Japan HRS | Hirose | Hirose TF13BA Series 0.4mm Pitch/0.9mm Height/Lower Contact FPC Connector Main Part No./Model:
| TF13BA-10S-0.4SH(800) | TF13BA-9S-0.4SH(800) | TF13BSA-16S-0.4SH(800) | TF13BSA-18S-0.4SH(800) | TF13BSA-20S-0.4SH(800) |
| TF13BA-6S-0.4SH(800) | TF13BSA-14S-0.4SH(800) |
------------------------------------------------------------------------------------------------
3、 Japan HRS Connectors -- HRS | Hirose | Japan Hirose TF13BA Series 0.4mm Pitch/0.9mm Height/Lower Contact FPC Connectors
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
