Categorization：Brand Connector
JSTJST connector Japanese press-on terminal BHS series 3.5 mm pitch press-on connector is a: 3.5 mm pitch/connector for printed circuit boards/press-on, plug-in type; Low back type connector with high withstand voltage, designed to connect LCD backlight to its starter. Its pressing terminals can be inserted into the housing with little force, making it suitable for flexible wires, such as silicone rubber insulated wires. Its main features are: low-back design, corresponding to SMT, corresponding to special wires, anti-misinsertion and locking mechanism, and wide end-point locking buckle on the socket side.
| The general electrical performance specifications of this series of products are: | |
| ● Rated voltage: 1.0 A AC/DC (when using AWG # 24) | ● Insulation resistance: 1,000 MΩ or more |
| ● Rated voltage: 1,400 V AC/DC | ● Withstand voltage: AC 3,800 V/1 minute |
| ● Operating temperature range:-25 ℃ ~ + 85 ℃ (including temperature increase when powered on) | ● Applicable wire range: conductor size AWG # 28 ~ # 24 |
| ● Contact resistance: initial stage/10 mΩ or less, after environmental test/20 mΩ or less | Outer diameter of outer skin/φ0.9 mm ~ φ1.7 mm |
1. JSTJST connector Japanese press terminal BHS series 3.5 mm pitch press connector main product specifications details:
| Type 1: | detachable type |
| Type 2: | Crimp type, for LCD backlight, ultra-small |
| Spacing: | 3.5 |
| Current: | 1.0A (AWG#24) |
| Features: | |
| Category Name: | Press-on connector (wire-to-board type) |
| Height: | 3.5 |
| Voltage: | 1400V |
| Thickness: | |
| Description: | Low back type connector with high withstand voltage, designed to connect LCD backlight to its starter. br> * smt configuration |
| * It can be inserted into the housing with a small force against the terminal, making it suitable for flexible wires, such as silicone rubber insulated wires. |
------------------------------------------------------------------------------------------------
2. Japanese JSTJST connector Japanese pressing terminal BHS series 3.5 mm pitch pressing connector main material number/model:
| sequence | Product Name | Series Name | RoHS |
| 1 | SBHS-002T-P0.5A | BHS Connector (W to B) | yes |
| 2 | BHSR-02VS-1(N) | BHS Connector (W to B) | yes |
| 3 | SM02B-BHSS-1-TB | BHS Connector (W to B) | yes |
------------------------------------------------------------------------------------------------
3. Japanese JST connector--JST Japanese press-on terminal BHS series 3.5 mm pitch press-on connector
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
