Categorization：Brand Connector
Compatible with/replacing JSTJST connector Japan press terminal SHR/SHDR connector series 2P ~ 50P1. 0mm pitch WTB connector male and female base product is a: 1.0 mm pitch/connector for printed circuit board/press, plug-in type; A double-row structure with a minimum pitch of 1.0 mm between circuit boards and wires is adopted. It adopts a low-profile design with a package height of 6.3 mm (top mount), 5.5 mm (side mount), and a width of 5.0 mm (top mount), and 5.1 mm (side mount), which meets the miniaturization and high-density packaging of the equipment. demand; Its main features are: corresponding to high density, anti-misinsertion structure, socket with handle that is convenient for operation, and adsorption during automatic packaging; Product material: PBT/PA66 UL94V-0/C5191, applicable wire: AWG # 28 ~ 32. [World Trade Electronic Products Network provides JSTJST connector Japanese pressed terminal SHR/SHDR connector series 2P ~ 50P1. 0mm pitch WTB connector male and female seat replacement].
------------------------------------------------------------------------------------------1. Compatible with/replacing JSTJST connector SHR/SHDR connector series 2P ~ 50P1. 0mm pitch WTB connector male and female seat Product related description and parameters:
| SHR/SHDR CONNECTOR Series Details: | SHR/SHDR CONNECTOR Series General Electrical Performance Specifications: | |
| Type 1: | detachable type | ● Rated current: 1.0 A AC/DC (when using AWG # 28) |
| Type 2: | Crimp type, ultra-small, double row | ● Rated voltage: 50V AC/DC |
| Spacing: | 1 | ● Operating temperature range:-25 ℃ ~ + 85 ℃ (including temperature increase when powered on) |
| Current: | 1.0A (AWG#28) | • Contact resistance: initial stage/20 mΩ or less; After environmental test/below 40mΩ |
| Features: | ● Insulation resistance: 100MΩ or more | |
| Category Name: | Press-on connector (wire-to-board type) | ● Withstand voltage: AC 500V/1 minute |
| Height: | 1 | ● Applicable wire range: conductor size/AWG # 32 ~ # 28; Outer diameter of outer skin/φ0.4 mm ~ φ0.8 mm |
| Voltage: | 50V | |
| Thickness: | ||
| Description: | * High-density double-row design | |
| * Although this seated plug has a locking function to fit into the socket, there are no holes in the barrier shield that would adversely affect the vacuum clamping device. | ||
| * This socket has protrusions at both ends, and the operator can separate the socket from the row bus without holding the wire. | ||
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------3. Compatible/replacement JSTSHR/SHDR connector series 2P ~ 50P1. 0mm pitch WTB connector male and female seat Product material number/model list:
| SHDR-30V-S-B | SHDR-20V-S-B | SM50B-SRDS-G-TF | SSH-003GA-P0.2 | SM30B-SRDS-G-TF |
| BM20B-SRDS-A-G-TF | BM50B-SRDS-A-G-TF | SHDR-40V-S-B | SM20B-SRDS-G-TF | SM40B-SRDS-G-TF |
| BM20B-SRDS-G-TF | BM30B-SRDS-G-TF | SHDR-50V-S-B | BM40B-SRDS-G-TF | BM30B-SRDS-A-G-TF |
| BM40B-SRDS-A-G-TF | BM50B-SRDS-G-TF |
---------------------------------------------------------------------------------------------4. Wire-to-board connector-compatible with JSTSHR/SHDR connector series 2P ~ 50P1. 0mm pitch WTB connector male and female seat replacement
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
