Categorization：Brand Connector
JSTJST connector Japan press terminal SHD series 1.0 mm pitch press connector is a: 1.0 mm pitch/printed circuit board connector/press, plug-in type; The product adopts a double-row structure with a minimum spacing of 1.0 mm between circuit boards and wires. It adopts a low-profile design with a package height of 6.3 mm (top mount), 5.5 mm (side mount), and a width of 5.0 mm (top mount), and 5.1 mm (side mount), which meets the miniaturization and high-density packaging of the equipment. demand. Its main features are: corresponding to high density, anti-misinsertion structure, socket with handle for convenient operation, and adsorption during automatic packaging.
| The general electrical performance specifications of this series of products are: | |
| ● Rated current: 1.0 A AC/DC (when using AWG # 28) | ● Insulation resistance: 100MΩ or more |
| ● Rated voltage: 50V AC/DC | ● Withstand voltage: AC 500V/1 minute |
| ● Operating temperature range:-25 ℃ ~ + 85 ℃ (including temperature increase when powered on) | ● Applicable wire range: conductor size/AWG # 32 ~ # 28 |
| ● Contact resistance: initial stage/20 mΩ or less | Outer diameter of outer skin/φ0.4 mm ~ φ0.8 mm |
| After environmental test/below 40mΩ | |
1. JSTJST connector Japanese pressed terminal SHD series 1.0 mm pitch pressed connector main product specifications details:
| Type 1: | detachable type |
| Type 2: | Crimp type, ultra-small, double row |
| Spacing: | 1 |
| Current: | 1.0A (AWG#28) |
| Features: | |
| Category Name: | Press-on connector (wire-to-board type) |
| Height: | 1 |
| Voltage: | 50V |
| Thickness: | |
| Description: | * High-density double-row design |
| * Although this seated plug has a locking function to fit into the socket, there are no holes in the barrier shield that would adversely affect the vacuum clamping device. | |
| * This socket has protrusions at both ends, and the operator can separate the socket from the row bus without holding the wire. |
------------------------------------------------------------------------------------------------
2. Japanese JSTJST connector Japanese pressing terminal SHD series 1.0 mm pitch pressing connector main material number/model:
| SHDR-30V-S-B | SHDR-20V-S-B | SM50B-SRDS-G-TF | SSH-003GA-P0.2 | SM30B-SRDS-G-TF |
| BM20B-SRDS-A-G-TF | BM50B-SRDS-A-G-TF | SHDR-40V-S-B | SM20B-SRDS-G-TF | SM40B-SRDS-G-TF |
| BM20B-SRDS-G-TF | BM30B-SRDS-G-TF | SHDR-50V-S-B | BM40B-SRDS-G-TF | BM30B-SRDS-A-G-TF |
| BM40B-SRDS-A-G-TF | BM50B-SRDS-G-TF |
------------------------------------------------------------------------------------------------
3. Japanese JST connector--JST Japanese pressed terminal SHD series 1.0 mm pitch pressed connector
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
