Categorization：Brand Connector
Compatible/Replacement HRS Hirose Hirose Connector HRSMDF76-30P-1C The board-to-wire LCD interface connector is a: 1.0 mm pitch, board-to-wire LCD interface connector; Its main features and advantages are: 1. High-speed data transmission The ground contact opposite the signal contact (receptacle) provides excellent impedance matching. 2. EMI protective metal enclosure provides shielding and ground connection. 3. Enhanced Plug/Receptacle Retention The unique configuration of the receptacle ground contact mating to the corresponding plug enhances the retention between them (MDF76-30P-1 plug with MDF76KBW or MDF76LBRW socket mating). 4. Prevent wrong insertion The built-in polarization function prevents the plug from being plugged into the socket in reverse. 5. High circuit board retention force The metal housing is soldered directly to the PC board. 6. RoHS compliant All components and materials comply with the requirements of EU Directive 2002/95/EC. [World Trade Electronic Products Network provides HRS Hirose Hirose connector HRSMDF76-30P-1C board-to-line LCD interface connector replacement].
----------------------------------------------------------------------------------1. Compatible with/replacing HRS Hirose connector HiroseMDF series connector board alignment LCD interface connector product specifications and parameters:
| Item | Specification | Conditions |
| 1. Insulation resistance | 100MΩ min. | 100V DC |
| 2. Withstanding voltage | No flashover or insulation breakdown | 500V AC / 1minute |
| 3. Contact resistance | 40mΩ max. | 20mV max., at 1 mA |
| 4. Durability | Contact resistance : 80mΩ max. No deformation of components affecting performance. | 50 cycles |
| 5. Vibration | No electrical discontinuity of 1μs or longer No damage, cracks or parts dislocation. | Frequency : 10 to 55Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 axial directions |
| 6.Shock | No electrical discontinuity of 1μs or longer No damage, cracks or parts dislocation. | Acceleration of 490m/s2 , 11ms duration, sine half-wave, 3 cycles in each of the 3 axis |
| 7. Humidity | Contact resistance : 80mΩ max., Insulation resistance : 50MΩ min. | 96 hours at 60 ±2ç, and humidity of 90% to 95% |
| 8. Temperature cycle | Contact resistance : 80mΩ max., Insulation resistance : 50MΩ min. No damage, cracks or parts dislocation. | 55ç → 5 to 35ç → 85ç → 5 to 35çTimes : 30 min.→ 2 min. to 3 min. → 30 min. → 2min. to B:B3 min.5 cycle |
| 9. Resistance to soldering heat | No deformation of components affecting performance. | Reflow : At the recommended temperature profile。Manual soldering : 300ç for 3 seconds |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
| MDF76-30P-1C | MDF76KBW-30S-1H(55) | MDF76LBRW-30S-1H(55) |
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
