en

FPC Connectors - Provide HRS Compatible | FH26W-37S-0.3SHW FPC Connector Replacement

Categorization:Brand Connector       

Specializing in the sales of: Connectors | Wire Harness | Cable Products

Compatible/Replacement HRS Hirose Hirose Connector HRSFH26W-37S-0.3 SHWFPC Connector is a: 0.3 mm pitch, 1.0 mm height FPC connector; Its main features and advantages are: 1. Low pitch 0.3 mm FPC connector ultra-thin design, height 1.0 mm, width 3.2 mm, saving design space; The PCB base surface is reduced by 30%; 40% weight reduction (weight reduction from 0.3 mm spacing FH23 Series 51 40% (compared to our 0.3 mm pitch FH23 series 51 position connectors.) 2. Easy PCB mounting, easy PCB Installation, the leads are double-sided design, and the installation lead spacing is 0.6 mm, which simplifies the installation; The mounting lead spacing is 0.6 mm, simplifying installation. 3. There is no pattern forbidden zone at the bottom of the connector (overmolded design); The bottom of this connector is fully molded to eliminate contact bare and remove any pattern exclusion zones (overmolded design); contact, eliminating contact on the PCB Graphics and Design Any restrictions on PCB graphics and design. 4. Flip Lock Lock Flip lock (one-button rotating ZIF mechanism) is easier to operate, just use a gentle force. Clear "click" The "sound marks the completion of the insertion process and the engagement process. [World Trade Electronic Products Network provides HRS Hirose Hirose connector FH26W-37S-0.3 SHW FPC connector replacement].

----------------------------------------------------------------------------------------1. Compatible with/replacing HRS Hirose connector Hirose FH26 series connector FPC connector product specifications and parameters:

ItemSpeciffcationConditions
Insulation Resistance50M Q Min.100V DC
Withstanding VoltageNo flashover or insulation breakdown.90V AC for 1 min.
Contact Resistance100m Q Max.Including FPC conductor resistance1mA
Mating Durability (Insertion/Withdrawal)Contact resistance : 100m Q MaxNo damage, cracks, or parts dislocation.10 cycles
VibrationNo electrical discontinuity of 1 u s or moreContact resistance : 100m Q Max.No damage, cracks, or parts dislocationFrequency : 10 to 55 Hzsingle amplitude of 0.75mm,10 cycles, 3 directions.
ShockNo electrical discontinuity of 1 u s. Min.Contact resistance : 100m Q Max.No damage, cracks, or parts dislocationAcceleration of 981 m/s?6 ms duration, sine half-wave waveform.3 cycles in each of the 3 axis
Humidity(Steady State)Contact resistance :100m Q MaxInsulation resistance : 50M Q MinNo affect on appearance or performance.96 hours at temperature of 40 士 2C and humidity of 90% to 95%.
Temperature CycleContact resistance : 100m Q MaxInsulation resistance : 50M Q Min.No damage, cracks, or parts looseness.Temperature : -55C-+15C to 35C- +85C++15C to +35C Time : 30 - 2 to 3 - 30 - 2 to 3 (Minutes)5 cycles
Resistance to Soldering HeatNo deformation of components affectingperformance.Reflow : At the recommended temperature profileManual soldering: 350C +/-10C for 51 seconds

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

FH26W-13S-0.3SHWFH26W-19S-0.3SHWFH26W-25S-0.3SHWFH26W-31S-0.3SHWFH26W-37S-0.3SHW
FH26W-15S-0.3SHWFH26W-21S-0.3SHWFH26W-27S-0.3SHWFH26W-33S-0.3SHWFH26W-39S-0.3SHW
FH26W-17S-0.3SHWFH26W-23S-0.3SHWFH26W-29S-0.3SHWFH26W-35S-0.3SHW

--------------------------------------------------------------------------------4. FPC Connector-Compatible HRSFH26W-37S-0.3 SHW FPC Connector Alternatives Available