Categorization：Harness Component
I-PEX | FPL II/20438 Series | 30p/40p/50p Very Thin Coaxial Harness is produced by I-PEX Company: larger power supply purpose, support for AWG # 32 electronic wire, support for eDP HBR2 (5.4 Gbps/lane), multi-point grounding anti-noise design, vertical plug mode, 0.5 mm pitch, very thin coaxial line connector and very thin coaxial line (AWG): # 36 # 38 # 40 # 42 # 44 # 46.
1、 Japan I-PEX | FPL II/20438 Series | 30P/40P/50P Very Thin Coaxial Harness Used Connector Specifications and Features and Pictures:
More power supply support for AWG # 32 electronic line, eDP HBR2 (5.4 Gbps/lane), multi-point grounding anti-noise design, vertical plug mode. 0.5 mm pitch, very thin coaxial line connector is more suitable for power supply, supports carrying AWG # 32 electronic wire, and can weld very thin coaxial line and electronic wire of different sizes at the same time. Effective shielding of electromagnetic interference Contact spacing (mm): 0.500Height: 2.40 Max (2.20 Nom.), available Pin number: 30 40 50 Very thin coaxial line (AWG): # 36 # 38 # 40 # 42 # 44 # 46 Fitting type: vertical
2、 Japan I-PEX | FPL II/20438 Series | 30p/40p/50p Extremely Thin Coaxial Harness Connector Part/Model List:
| Part Number Description | Pin count | Part Number | |
| PLUG FOR CABLE ASSEMBLY | 30 | 20437-030T-01 | |
| 40 | 20437-040T-01 | ||
| 50 | 20437-050T-01 | ||
| PLUG HOUSING | 30 | 20438-030T-01 | |
| 40 | 20438-040T-01 | ||
| 50 | 20438-050T-01 | ||
| PLUG SHELL | 30 | 2496-030 | |
| 40 | 2496-040 | ||
| 50 | 2496-050 | ||
| RECEPTACLE | 30 | 20439-030E-01 | |
| 40 | 20439-040E-01 | ||
| 50 | 20439-050E-01 | ||
3、 Japan I-PEX | FPL II/20438 Series | 30p/40p/50p Very Thin Coaxial Wire Harness Structure/Wire Diameter Schematic Reference Drawing:
4、 Japan I-PEX | FPL II/20438 Series | 30p/40p/50P Ultra-thin Coaxial Wire Harness Production Process Brief Description: The main process of wire harness preparation:
4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.
Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.
5、 Japan I-PEX | FPL II/20438 Series | 30p/40p/50p Very Thin Coaxial Harness Product Picture (Picture is for reference only):
---------------------------------------------------------------------------------------------------
6、 Japan I-PEX | FPL II/20438 Series | 30p/40p/50p Very Thin Coaxial Wire Harness Manufacturer/Distributor:
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
