I-PEX|CABLINE®-CBL/20473 Series|30P/40P Extremely Fine Coaxial Wire Harnesses

I-PEX | CABLINE ® -CBL/20473 Series | 30p/40p Very Thin Coaxial Harness is produced by I-PEX: 0.4 mm pitch, horizontal plug, Connector with mechanical lock Height: 0.825 mm. Harness composed of very thin coaxial line connector and very thin coaxial line (AWG): # 40 # 42 # 44 # 46.

1、 Japan I-PEX | CABLINE ® -CBL/20473 Series | Specifications, Features and Pictures of Connectors Used in 30p/40p Very Thin Coaxial Harness: 0.4 mm Pitch, Horizontal Plug and Pull, Very thin coaxial line connector with mechanical lock (connector height: 0.825 mm.) Low-back connector: mating height 0.975mm Max. (0.825 mm nominal) mechanical latch option, It can prevent the connector from being inserted incompletely or falling off. Multi-point grounding design has good anti-EMI performance. Contact spacing (mm): 0.400 Height: 0.98 Max (0.83 Nom.) Available Pin Number: 30 40 AWG: # 40 # 42 # 44 # 46 Fitting Type: Horizontal

2、 Japan I-PEX | CABLINE ® -CBL/20473 Series | 30p/40p Extremely Thin Coaxial Harness Connector Part/Model List:

3、 Japan I-PEX | CABLINE ® -CBL/20473 Series | 30p/40p Very Thin Coaxial Wire Harness Used Very Thin Coaxial Wire Structure/Wire Diameter Schematic Drawing:

4、 Japan I-PEX | CABLINE ® -CBL/20473 Series | 30p/40p Ultra-thin Coaxial Wire Harness Production Process Brief Description: The main process of wire harness preparation:

4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.

Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.

5、 Japan I-PEX | CABLINE ® -CBL/20473 Series | 30p/40p Very Thin Coaxial Harness Product Picture (Picture is for reference only):

---------------------------------------------------------------------------------------------------

6、 Japan I-PEX | CABLINE ® -CBL/20473 Series | 30p/40p Very Thin Coaxial Wire Harness Manufacturer/Distributor: