Categorization：Harness Component
I-PEX | CABLINE ® -UA II/20497 Series | 26p/32P/40p/50p Very Thin Coaxial Harness is produced by I-PEX: 0.3mm pitch, vertical plug, Right Angle outlet, very thin coaxial connector. Harness composed of very thin coaxial line connector of CABLINE ® -UA II/20497 series and very thin coaxial line (AWG): # 42 # 44 # 46.
1、 Japan I-PEX | CABLINE ® -UA II/20497 Series | 26P/32P/40P/50P Very Thin Coaxial Harness Connector Specifications and Features and Pictures: 0.3mm pitch, vertical plug, Right Angle outlet, Very thin coaxial connectors are ideal for small electronics where space is limited. Multi-point grounding design that can easily pass through the shaft has good anti-EMI performance Contact pitch (mm): 0.300 Height: 1.37 Max (1.27 Nom.), Available Pin Number: 26 32 40 50 AWG: # 42 # 44 # 46 Fitting Type: Vertical
2、 Japan I-PEX | CABLINE ® -UA II/20497 Series | 26p/32P/40p/50p Very Thin Coaxial Harness Connector Part/Model List:
| Part Number Description | Pin count | Part Number | |
| PLUG FOR CABLE ASSEMBLY | 26 | 20496-026T-40 | |
| 32 | 20496-032T-40 | ||
| 40 | 20496-040T-40 | ||
| 50 | 20496-050T-40 | ||
| Plug parts | PLUG HOUSING | 26 | 20497-026T-30 |
| 32 | 20497-032T-30 | ||
| 40 | 20497-040T-30 | ||
| 50 | 20497-050T-30 | ||
| PLUG METAL COVER | 26 | 2679-026-10 | |
| 32 | 2679-032-10 | ||
| 40 | 2679-040-10 | ||
| 50 | 2679-050-10 | ||
| RECEPTACLE | 26 | 20498-026E-41 | |
| 32 | 20498-032E-41 | ||
| 40 | 20498-040E-41 | ||
| 50 | 20498-050E-41 | ||
3、 Japan I-PEX | CABLINE ® -UA II/20497 Series | Extremely Thin Coaxial Wire Structure/Wire Diameter Schematic Drawing for 26p/32P/40p/50p Extremely Thin Coaxial Wire Harness:
4、 Japan I-PEX | CABLINE ® -UA II/20497 Series | 26p/32P/40p/50P Ultra-thin Coaxial Harness Production Process Brief Description: Main process of harness preparation:
4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.
Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.
5、 Japan I-PEX | CABLINE ® -UA II/20497 Series | 26p/32P/40p/50p Very Thin Coaxial Harness Product Picture (Picture is for reference only):
6、 Japan I-PEX | CABLINE ® -UA II/20497 Series | 26p/32P/40p/50p Very Thin Coaxial Wire Harness Manufacturer/Distributor:
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
