Categorization：Harness Component
I-PEX | CABLINE ® -SS/20373 Series | 10P/14P/20P/30P/32P/35P/40P/50P Very Thin Coaxial Harness is produced by I-PEX: Narrow, rugged, vertically pluggable, horizontal outlet, able to withstand high currents (AWG # 34) Pitch 0.4 mm, High temperature resistant, high humidity resistant optional, very thin coaxial line connector of CABLINE ® -SS/20373 series is combined with very thin coaxial line (AWG): # 38 # 40 # 42 # 44 # 46.
1、 Japan I-PEX | CABLINE ® -SS/20373 series | 10p/14p/20p/30p/32P/35p/40p/50P connector specifications and features used in very thin coaxial harness and picture: narrow, solid, vertical plug, horizontal outlet, Able to withstand high currents (AWG # 34) 0.4 mm pitch, high temperature, high humidity options Narrow and small design for perforation, larger for power supply purposes Unique W-Point dual contact design for use with AWG # 34 cable. High contact reliability High temperature/humidity resistance (autoclaved) Selectable contact spacing (mm): 0.400Height: 1.85 Max (1.65 Nom.), Available Pin Numbers: 10 14 20 30 32 35 40 50 AWG: # 38 # 40 # 42 # 44 # 46 Fitting Type: Vertical
2、 Japan I-PEX | CABLINE ® -SS/20373 Series | 10P/14P/20P/30P/32P/35P/40P/50P Connector Part/Model List for Very Thin Coaxial Harness:
| Part Number Description | Pin count | Part Number | |
| PLUG FOR CABLE ASSEMBLY | 10 | 20380-R10T-06 | |
| 14 | 20380-R14T-06 | ||
| 20 | 20380-R20T-06 | ||
| 30 | 20380-R30T-06 | ||
| 32 | 20380-R32T-06 | ||
| 35 | 20380-R35T-06 | ||
| 40 | 20380-R40T-16 | ||
| 50 | 20380-R50T-16 | ||
| Plug parts | PLUG HOUSING | 10 | 20373-R10T-06 |
| 14 | 20373-R14T-06 | ||
| 20 | 20373-R20T-06 | ||
| 30 | 20373-R30T-06 | ||
| 32 | 20373-R32T-06 | ||
| 35 | 20373-R35T-06 | ||
| 40 | 20373-R40T-06 | ||
| 50 | 20373-R50T-06 | ||
| PLUG METAL COVER | 10 | 2182-010-03 | |
| 14 | 2182-014-03 | ||
| 20 | 2182-020-03 | ||
| 30 | 2182-030-03 | ||
| 32 | 2182-032-03 | ||
| 35 | 2182-035-03 | ||
| 40 | 2182-040-04 | ||
| 50 | 2182-050-04 | ||
| RECEPTACLE | 10 | 20374-R10E-31 | |
| 14 | 20374-R14E-31 | ||
| 20 | 20374-R20E-31 | ||
| 30 | 20374-R30E-31 | ||
| 32 | 20374-R32E-31 | ||
| 35 | 20374-R35E-31 | ||
| 40 | 20374-R40E-31 | ||
| 50 | 20374-R50E-31 | ||
3、 Japan I-PEX | CABLINE ® -SS/20373 Series | Structure/Diameter of Very Thin Coaxial Wire Used in 10p/14p/20p/30p/32P/35p/40p/50p Very Thin Coaxial Wire Harness
4、 Japan I-PEX | CABLINE ® -SS/20373 Series | 10p/14p/20p/30p/32P/35p/40p/50P Ultra-thin Coaxial Wire Harness Production Process Brief Description: The main process of wire harness preparation:
4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.
Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.
5、 Japan I-PEX | CABLINE ® -SS/20373 Series | 10p/14p/20p/30p/32P/35p/40p/50p Very Thin Coaxial Harness Product Picture (Picture is for reference only):
6、 Japan I-PEX | CABLINE ® -SS/20373 Series | 10p/14p/20p/30p/32P/35p/40p/50p Very Thin Coaxial Wire Harness Manufacturer/Distributor:
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
