Categorization：Harness Component
I-PEX | CABLINE ® -UX II/20532 Series | 30p/34p/40p/50p very thin coaxial harnesses are produced by I-PEX: 0.25 mm pitch, 90 ° outlet, vertical plug, Very Thin Coaxial Connectors, very thin coaxial connectors of the CABLINE ® -UX II/20532 series combined with very thin coaxial wires (AWG): # 44 # 46.
1、 Japan I-PEX | CABLINE ® -UX II/20532 Series | 30p/34p/40p/50p Very Thin Coaxial Harness Connector Specifications and Features and Pictures: 0.25 mm pitch, 90 ° outlet, vertical plug, Very thin coaxial connectors are ideal for small electronics where space is limited. Multi-point grounding design that can easily pass through the rotating shaft has good anti-EMI performance Contact spacing (mm): 0.250 Height: 1.10 Max (1.04 Nom.), available Pin number: 30 34 40 50 Very thin coaxial line (AWG): # 44 # 46 Fitting type: vertical
2、 Japan I-PEX | CABLINE ® -UX II/20532 Series | 30p/34p/40p/50p Very Thin Coaxial Harness Connector Part/Model List:
| Part Number Description | Pin count | Part Number | |
| PLUG FOR CABLE ASSEMBLY | 30 | 20531-030T-02 | |
| 34 | 20531-034T-02 | ||
| 40 | 20531-040T-02 | ||
| 50 | 20531-050T-02 | ||
| Plug parts | PLUG HOUSING | 30 | 20532-030T-02 |
| 34 | 20532-034T-02 | ||
| 40 | 20532-040T-02 | ||
| 50 | 20532-050T-02 | ||
| PLUG METAL COVER | 30 | 2799-0301 | |
| 34 | 2799-0341 | ||
| 40 | 2799-0401 | ||
| 50 | 2799-0501 | ||
| RECEPTACLE | 30 | 20533-030E | |
| 34 | 20533-034E | ||
| 40 | 20533-040E | ||
| 50 | 20533-050E | ||
3、 Japan I-PEX | CABLINE ® -UX II/20532 Series | 30p/34p/40p/50p Very Thin Coaxial Wire Harness Used Very Thin Coaxial Wire Structure/Wire Diameter Schematic Reference Drawing:
4、 Japan I-PEX | CABLINE ® -UX II/20532 Series | 30p/34p/40p/50p Ultra-thin Coaxial Wire Harness Production Process Brief Description: The main process of wire harness preparation:
4.1: Prepare the cable assembly 4.2: Install the cable assembly to the male body assembly and solder the exposed wire to the male signal terminal 4.3: Position the latch assembly (or latch) Male part 4.4: Cover the male housing and solder the required area to complete the male harness First, prepare the very thin coaxial line to facilitate the harness assembly. Pretreated cables are referred to as cable assemblies. This pretreatment simplifies the cable welding process of the connector and improves the stability of the quality of the male harness. This is done before the cable is soldered to the connector.
Condly, the outer conductor of the cable is welded on the connector shell, and the outer conductor of the cable is electrically connected with the PCB through the connector to obtain good grounding characteristics.
5、 Japan I-PEX | CABLINE ® -UX II/20532 Series | 30p/34p/40p/50p Very Thin Coaxial Harness Product Picture (Picture is for reference only)
6、 Japan I-PEX | CABLINE ® -UX II/20532 Series | 30p/34p/40p/50p Very Thin Coaxial Wire Harness Manufacturer/Distributor:
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
