Produces I-PEX 0.25~1.0mm pitch and #36awg~#46awg combination of very fine coaxial wire harnesses.

Our connector manufacturer is I-PEX's 0.25 mm ~ 1.0mm pitch ultra-thin coaxial line connector and ultra-thin coaxial wire harness with ultra-thin coaxial cable diameter of # 32 AWG ~ # 46awg; I-PEX Co., Ltd. was established in Machida, Tokyo, and is a connector supplier; I-PEX's first commercial success was the development of the CABLINE series of very thin coaxial connectors. These connectors were quickly adopted by most notebook and monitor manufacturers, achieving very high sales.

1、 What is very thin coaxial wire?: The center conductor used in coaxial wire is sized according to the American Wire Gauge (AWG) standard, the larger the AWG number, the smaller the center conductor size. In general, coaxial wires having an outer diameter (O. D.) of 1 mm or less are referred to as "very thin coaxial" wires. Extremely thin coaxial lines are widely used for signal transmission between module boards inside personal computers, tablet computers, smart phones and other devices, as well as between precision instruments in medical, industrial, automotive, aviation and other fields.

-------------------------------------------------------------------------------------------------

2、 What is a very thin coaxial line connector?: Very thin coaxial line connectors are mainly used to connect digital signals between module boards in the differential transmission mode through very thin coaxial lines. For proper signal transmission, the center conductor transmitting the signal needs to be connected to the signal circuit on the PCB board through the terminals of the connector. The outer conductor of the cable needs to be electrically connected to the PCB board through the metal part of the connector, the housing. The electrical connection of the outer conductor to the PCB board through the connector housing is referred to as "ground".

-------------------------------------------------------------------------------------------------

3、 The material number or model of the I-PEX ultra-thin coaxial line connector used in the ultra-thin coaxial harness produced by our company is as follows:

-------------------------------------------------------------------------------------------------

4、: The schematic diagram of the I-PEX ultra-thin coaxial line connector series used in the ultra-thin coaxial wire harness produced by our company is as follows:

20907 series	20847 series	20680 series	20680 series	20878 series
20634 series	20454 series	20777 series	205 32 series	20974 series
20974 series	20373 series	20497 series	20473 series	20346 series

-------------------------------------------------------------------------------------------------

5、 for some pictures of the very thin coaxial harness (Micro Coaxial Cable) harness assembly products produced by our company (pictures are for reference only):

-------------------------------------------------------------------------------------------------

6、 how to buy or know about I-PEX very thin coaxial harness (Micro Coaxial Cable) harness assembly products? ：