Categorization：Harness Component
HTK LVD-A30SFYG + Extremely Thin Coaxial Wire Harness is a type of LVD series produced by HTK (Japan Hondo Communications) with the material number of LVD-A30S FYG + | contact spacing: 0.5mm Extremely Thin Coaxial Connector and Adaptable Extremely Thin Coaxial Wire (AWG): # 36 # 38 # 40 # 42 # 44 # 46 is a kind of wire harness product assembled through unique production process. Our company (World Trade Electronic Products Network) specializes in the production of ultra-thin coaxial wire harnesses-HTK LVD-A30SFYG + | 0.5mm spacing | # 36- # 46 ultra-thin coaxial wire harness. The following picture shows the ultra-thin coaxial wire harness (Micro) produced by our company. Some pictures of Coaxial Cable harness assembly products (pictures are for reference only).
Connectors for 1、 HTK LVD-A30SFYG + | 0.5mm pitch | 36awg-46awg | very thin coaxial harness, specifications and features:
| LVD series connectors are used to support the miniaturization of notebook computers, digital devices, or to save space between internal motherboards. |
| Features |
| Designed with a low profile so that plugs and sockets are 2 mm |
| The vertical fit of the connector is used to provide a higher degree of freedom for connector installation |
| By providing 8 locking positions, the PIN is in full and tight contact. |
| Shielding performance has been greatly improved by installing a metal shell over the entire outlet and sandwiching the two shells above and below the plug. |
| Capable of connecting thin coaxial cables and discrete cables |
| Application |
| Notebook PCs, Personal Digital Assistants (PDA),Camcorders, etc. |
| General Electrical Performance and Specification |
| Number of contacts: 30, 40 |
| Connection method: |
| Socket: Solder reflow mounting technique, |
| Plug: pulse heat welding technology |
| Current rating: 0.3 A to 0.2 A/pin (depending on cable conductor diameter) |
| Rated voltage: 50V AC (R. M. S.) |
| Operating temperature: -55 ° C to + 85 ° C |
| Insulation resistance: 100 megohms at 250V DC |
| . Dielectric withstand voltage: 150V AC (R. M. S.) for one minute |
| . Recommended cables: |
| Slim Coax: AWG # 36 to # 42 |
| Discrete cable: AWG # 32 O. D. 0.4mm MAX |
| Compliance with restrictions: Hazardous Substances (RoHS)/Halogen-free |
-------------------------------------------------------------------------------------------------
2、 HTK LVD-A30SFYG + | 0.5mm pitch | 36awg-46awg | Extremely thin coaxial line used for extremely thin coaxial harness Schematic diagram and specification parameters:
-------------------------------------------------------------------------------------------------
3、 that the ultra-thin coaxial wire harness produced by our company uses the material number or model of the ultra-thin coaxial wire connector of HONDA (Benduo Communication) Company as follows:
| LVC-D10LPMSG+ | LVC-D10SFYG+ | LVC-C20LPMSG+ | LVC-D20LPMSG+ | LVC-D20SFYG3+ |
| LVC-C30LPMSG+ | LVC-C30SFYG+ | LVC-C40SFYG+ | LVC-C40LPMSG+ | LVD-A30LMSG+ |
| LVD-A30SFYG+ | LVD-A30SFYG-TP | LVD-A50LMSG+ | LVD-A50SFYG+ | LVD-A40LMSG+ |
| LVD-A40SFYG+ | LVX-A40LMSG+ | LVX-A40SFYG+ | LVX-A30LMSG+ | LVX-A30SFYG+ |
-------------------------------------------------------------------------------------------------
4、 how to buy or know about HTK LVD-A30SFYG + | 0.5mm pitch | # 36- # 46 very thin coaxial harness assembly products? ：
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
