Categorization：Harness Component
I-PEXCABLINE ®-CA II/20680 series 20P/30P/40P/50P ultra-thin coaxial harness is produced by I-PEX Company: fully shielded design with mechanical catch, high-speed data transmission (20 Gbps/lane), 0.4 mm pitch, horizontal plug-in version, CABLINE ®-CA II/20680 series ultra-thin coaxial connector and ultra-thin coaxial (AWG) harness: # 38 # 40 # 42 # 44 # 46.
1. Specifications, features and pictures of connectors used in ® I-PEXCABLINE ®-CA II/20680 series 20P/30P/40P/50P ultra-thin coaxial bundles: Fully shielded design with mechanical locking, high-speed data transmission (20 Gbps/lane), 0.4 mm pitch, horizontal plug-in ultra-thin coaxial connector ZenShield ® 's fully shielded and multi-point grounding design effectively prevents EMI leakage Mechanical locking cover prevents incomplete fitting and falling off High-speed transmission, Thunderbolt 3 (20 Gbps/lane) applications Contact pitch (mm): 0.400 Height: 1.10 Max Pin number available: 20 30 40 50 Ultra-thin coaxial wire (AWG): # 38 # 40 # 42 # 44 # 46 Fitting type: Horizontal
2. List of connector material numbers/models used in Japanese I-PEXCABLINE ®-CA II/20680 series 20P/30P/40P/50P ultra-fine coaxial wire harness:
| Part Number Description | Pin count | Part Number | |
| PLUG FOR CABLE ASSEMBLY | 20 | 20679-020T-01 | |
| 30 | 20679-030T-01 | ||
| 40 | 20679-040T-01 | ||
| 50 | 20679-050T-01 | ||
| Plug parts | PLUG HOUSING | 20 | 20680-020T-01 |
| 30 | 20680-030T-01 | ||
| 40 | 20680-040T-01 | ||
| 50 | 20680-050T-01 | ||
| PLUG SHELL | 20 | 3204-0201 | |
| 30 | 3204-0301 | ||
| 40 | 3204-0401 | ||
| 50 | 3204-0501 | ||
| PLUG LOCK BAR | 20 | 20681-020T-01 | |
| 30 | 20681-030T-01 | ||
| 40 | 20681-040T-01 | ||
| 50 | 20681-050T-01 | ||
| RECEPTACLE | 20 | 20682-020E-02 | |
| 30 | 20682-030E-02 | ||
| 40 | 20682-040E-02 | ||
| 50 | 20682-050E-02 | ||
3. Japanese I-PEXCABLINE ®-CA II/20680 series 20P/30P/40P/50P ultra-thin coaxial wire bundle schematic reference diagram of the ultra-thin coaxial wire structure/wire diameter:
4. Japanese I-PEXCABLINE ®-CA II/20680 series 20P/30P/40P/50P ultra-fine coaxial wire harness production process brief description: The main process of wire harness preparation:
4.1: Prepare cable assembly 4.2: Install cable assembly onto male body assembly and solder exposed wires to male signal terminals 4.3: Position catch assembly (or catch) male component 4.4: Cover male housing and solder required area to complete male harness First, pretreat the very thin coaxial line to facilitate harness assembly. A pre-treated cable is called a cable assembly. This pretreatment simplifies the cable welding process of the connector and improves the stability of the male wire harness quality. This is done before the cable is soldered to the connector.
Secondly, the outer conductor of the cable is welded to the connector shell, and the outer conductor of the cable is electrically connected with the PCB board through the connector to obtain good grounding characteristics.
5. Japanese I-PEXCABLINE ®-CA II/20680 series 20P/30P/40P/50P ultra-fine coaxial wire harness product physical pictures (pictures are for reference only):
5. Japanese I-PEXCABLINE ®-CA II/20680 series 20P/30P/40P/50P ultra-fine coaxial wire harness Manufacturer/seller of this product:
“Without the consent or authorization of this site, no one shall reproduce, reprint, distribute, cite, change, broadcast or publish the content in whole or in part in any form, nor shall there be any other violation of the copyright of this site.
